How much should I budget for blast-resistant glazing in Perth?
Our guide range for blast-resistant glazing in Perth is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.
Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.
Glass and fitting options
- Laminated glass with thick or stiff interlayers
- Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
- Manufacturer's test evidence supplied with your quote
- Blast-resistant net curtains as a fragment-catching layer
- Deep-bite frames and structural silicone or mechanical retention
- Anti-shatter film with edge-retention systems for existing windows
Fitting in Perth and nearby
Surveys in Perth (PH1) are booked around installer availability, as they are in nearby Blairgowrie (14 miles) and Crieff (16 miles).
Perth and Kinross covers Perth's Georgian and Victorian city centre, the stone resort towns of Pitlochry and Aberfeldy further north, and Kinross commuter villages near the M90.
Common uses:
- Offices in city centres and near potential targets
- Embassies, courts and police premises
- Laboratories and industrial sites with process risks
- Transport hubs, venues and stadium frontages
What to think about first
Fragment hazard
Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.
Who sets the level
The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.
Consents and safety: Scotland
Planning permission
Under the Scottish planning system the council decides whether a new or altered shopfront needs planning permission; changing the glass in an existing frame usually does not. Bollards or barriers in a road or footway need consent from the roads authority, which is normally the council.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 applies in Scotland. Windows and transparent surfaces in walls, partitions, doors and gates must be of safety material or protected against breakage where health or safety requires it, and marked so people see them. The duty holder's risk assessment decides where.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Blast-resistant glazing in Perth: questions
Can you survey in Perth and nearby towns?
Yes. Surveys in Perth, Blairgowrie and Crieff are booked around installer availability.
Who decides what level of protection we need?
Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.
Can existing windows be made blast-resistant?
They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.
Is blast film enough on its own?
Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.
Blast-resistant glazing in nearby towns
Other glazing in Perth
- Laminated security glass
- Bullet-resistant glass
- Shopfront security glass
- Anti-bandit glass
- Anti-ram-raid glazing
- Security glass for doors
Start with a guide price online, then we survey and fix the price in writing.