Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · CF34 · Mid Glamorgan

Blast-resistant glazing in Maesteg

Blast-resistant glazing in Maesteg and the CF34 area, measured on site and priced in writing before any glass is ordered.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Maesteg

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of blast-resistant glazing in Maesteg?

Typical prices for blast-resistant glazing in Maesteg are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Glass and fitting options

  • Laminated glass with thick or stiff interlayers
  • Deep-bite frames and structural silicone or mechanical retention
  • Anti-shatter film with edge-retention systems for existing windows
  • Sealed units with a laminated inner pane
  • Blast-resistant net curtains as a fragment-catching layer
  • Work planned from the threat assessment and engineer's design

Fitting in Maesteg and nearby

From the CF34 district we also cover Port Talbot (6 miles) and Neath (7 miles). Survey dates depend on installer availability.

Mid Glamorgan covers the valley towns of Merthyr Tydfil, Pontypridd and Aberdare with their long terraced streets, Bridgend's town centre and retail parks, and newer estates near the M4.

This glazing suits:

  • Offices in city centres and near potential targets
  • Laboratories and industrial sites with process risks
  • Government, council and civic buildings
  • Transport hubs, venues and stadium frontages

Questions we will ask at the survey

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Building regulations and safety in Wales

Wales

Planning permission

In Wales the local planning authority decides whether a new or altered shopfront needs planning permission. Replacing glass in an existing frame usually does not, because the outside of the building looks much the same. Bollards or barriers on the pavement need consent from the highway authority, normally the council.

Fire-rated glass is different

Glass in fire doors and fire screens must be fire-rated glass tested as part of that door or screen, under Approved Document B for Wales and, in non-domestic premises, the Regulatory Reform (Fire Safety) Order 2005. Security and laminated glass are not fire-rated unless the product is tested for it, so the two cannot simply be swapped.

How it works

  1. Postcode and a few photos
  2. On-site survey
  3. Fixed written price and lead time
  4. Fit, check and explain

Blast-resistant glazing in Maesteg: questions

Can you survey in Maesteg and nearby towns?

Yes. Surveys in Maesteg, Port Talbot and Neath are booked around installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Maesteg

Start with a guide price online, then we survey and fix the price in writing.

Get a guide price for Maesteg

Free survey for new installations in Maesteg and the CF34 area. Fixed price in writing before anything is ordered.

CallGet a price