Blast-resistant glazing in Bebington

What should blast-resistant glazing cost in Bebington?

Our guide range for blast-resistant glazing in Bebington is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

Laminated glass with thick or stiff interlayers
Deep-bite frames and structural silicone or mechanical retention
Manufacturer's test evidence supplied with your quote
Anti-shatter film with edge-retention systems for existing windows
Blast-resistant net curtains as a fragment-catching layer
Work planned from the threat assessment and engineer's design

Fitting in Bebington and nearby

Surveys in Bebington (CH63) are booked around installer availability. We also cover nearby Birkenhead (3 miles), Heswall (4 miles) and Liverpool (4 miles).

Merseyside has Liverpool's listed commercial centre and waterfront offices, Victorian terraces across the city and the Wirral, and suburban high streets in Southport and St Helens.

Good candidates for blast-resistant glazing:

Transport hubs, venues and stadium frontages
Laboratories and industrial sites with process risks
Offices in city centres and near potential targets
Embassies, courts and police premises

Before the glass is ordered

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Glazing rules in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Send sizes or use the quote tool
Free survey at your Bebington address
Fixed price in writing
Glass made, then fitted

Blast-resistant glazing in Bebington: questions

Can you survey in Bebington and nearby towns?

Yes. Surveys in Bebington, Birkenhead and Heswall are booked around installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Blast-resistant glazing in nearby towns

Other glazing in Bebington

Ready for a price? Use the form or call 0800 088 6248.