Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · PE21 · Lincolnshire

Blast-resistant glazing in Boston

Blast-resistant glazing for shops, offices and other business premises in Boston, with the glass makeup confirmed in writing before it is ordered.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Boston

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Boston: what will it cost?

Budget £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Boston, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

  • Blast-resistant net curtains as a fragment-catching layer
  • Anti-shatter film with edge-retention systems for existing windows
  • Manufacturer's test evidence supplied with your quote
  • Sealed units with a laminated inner pane
  • Laminated glass with thick or stiff interlayers
  • Work planned from the threat assessment and engineer's design

Fitting in Boston and nearby

Whether you are in central Boston or at the edge of the PE21 district, we can arrange a survey. Nearby Spalding and Sleaford are covered too.

Lincolnshire spans Lincoln's hilltop historic quarter, Georgian Stamford, market towns across the Wolds and Fens, and coastal resorts such as Skegness and Cleethorpes.

Typical settings for blast-resistant glazing:

  • Transport hubs, venues and stadium frontages
  • Offices in city centres and near potential targets
  • Government, council and civic buildings
  • Embassies, courts and police premises

Getting the right glass for your building

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

What the rules say in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Postcode and a few photos
  2. On-site survey
  3. Fixed written price and lead time
  4. Fit, check and explain

Blast-resistant glazing in Boston: questions

Do you cover Spalding as well as Boston?

Yes. As well as Boston, we can arrange surveys in nearby Spalding, Sleaford and Skegness. Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Boston

Start with a guide price online, then we survey and fix the price in writing.

Get a guide price for Boston

Free survey for new installations in Boston and the PE21 area. Fixed price in writing before anything is ordered.

CallGet a price