Blast-resistant glazing in Strood

What is the price of blast-resistant glazing in Strood?

Guide prices for blast-resistant glazing in Strood are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

Work planned from the threat assessment and engineer's design
Sealed units with a laminated inner pane
Blast-resistant net curtains as a fragment-catching layer
Laminated glass with thick or stiff interlayers
Anti-shatter film with edge-retention systems for existing windows
Deep-bite frames and structural silicone or mechanical retention

Fitting in Strood and nearby

Whether you are in central Strood or at the edge of the ME2 district, we can arrange a survey. Nearby Rochester and Chatham are covered too.

Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.

This glazing suits:

Offices in city centres and near potential targets
Laboratories and industrial sites with process risks
Embassies, courts and police premises
Government, council and civic buildings

Questions we will ask at the survey

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Blast-resistant glazing in Strood: questions

Do you cover Rochester as well as Strood?

Yes. As well as Strood, we can arrange surveys in nearby Rochester, Chatham and Gillingham. Dates depend on installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Strood

Get a guide price now and book your free survey in Strood.

Free quote in Strood