Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · WD6 · Hertfordshire

Blast-resistant glazing in Borehamwood

Need blast-resistant glazing in Borehamwood? Send sizes or photos for a guide price, then we survey and confirm a fixed price.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Borehamwood

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Borehamwood: what will it cost?

Guide prices for blast-resistant glazing in Borehamwood are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

  • Deep-bite frames and structural silicone or mechanical retention
  • Blast-resistant net curtains as a fragment-catching layer
  • Work planned from the threat assessment and engineer's design
  • Laminated glass with thick or stiff interlayers
  • Sealed units with a laminated inner pane
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934

Fitting in Borehamwood and nearby

We can arrange blast-resistant glazing anywhere in Borehamwood, and in nearby Barnet, Bushey and Potters Bar. Tell us your postcode and we will offer dates.

Hertfordshire includes the historic centres of St Albans and Hertford, post-war new towns such as Stevenage and Hatfield, and Watford's shops and office parks along the M1.

Typical settings for blast-resistant glazing:

  • Laboratories and industrial sites with process risks
  • Transport hubs, venues and stadium frontages
  • Government, council and civic buildings
  • Offices in city centres and near potential targets

Getting the right glass for your building

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

What the rules say in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Guide price online or by phone
  2. Survey in Borehamwood
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Blast-resistant glazing in Borehamwood: questions

Which areas near Borehamwood do you cover?

We can arrange work in Borehamwood and in nearby Barnet (3 miles), Bushey (4 miles) and Potters Bar (5 miles). Dates depend on installer availability.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Blast-resistant glazing in nearby towns

Other glazing in Borehamwood

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Borehamwood

Free survey for new installations in Borehamwood and the WD6 area. Fixed price in writing before anything is ordered.

CallGet a price