Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · PO12 · Hampshire

Blast-resistant glazing in Gosport

Start with a guide price for blast-resistant glazing in Gosport, then book a free survey for a fixed written quote.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Gosport

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What should blast-resistant glazing cost in Gosport?

Typical prices for blast-resistant glazing in Gosport are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

  • Sealed units with a laminated inner pane
  • Anti-shatter film with edge-retention systems for existing windows
  • Deep-bite frames and structural silicone or mechanical retention
  • Work planned from the threat assessment and engineer's design
  • Laminated glass with thick or stiff interlayers
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934

Fitting in Gosport and nearby

Surveys in Gosport (PO12) are booked around installer availability. We also cover nearby Portsmouth (2 miles), Fareham (4 miles) and Waterlooville (7 miles).

Hampshire covers the port-city shops and offices of Southampton and Portsmouth, Winchester's listed centre, and commuter estates around Basingstoke, Eastleigh and Fareham.

Good candidates for blast-resistant glazing:

  • Transport hubs, venues and stadium frontages
  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets
  • Embassies, courts and police premises

Before the glass is ordered

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Glazing rules in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Gosport address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Gosport: questions

Can you survey in Gosport and nearby towns?

Yes. Surveys in Gosport, Portsmouth and Fareham are booked around installer availability.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Gosport

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Gosport

Free survey for new installations in Gosport and the PO12 area. Fixed price in writing before anything is ordered.

CallGet a price