Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · LL53 · Gwynedd

Blast-resistant glazing in Pwllheli

Need blast-resistant glazing in Pwllheli? Send sizes or photos for a guide price, then we survey and confirm a fixed price.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Pwllheli

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Pwllheli: what will it cost?

As a guide, allow £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Pwllheli, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

  • Anti-shatter film with edge-retention systems for existing windows
  • Blast-resistant net curtains as a fragment-catching layer
  • Work planned from the threat assessment and engineer's design
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Sealed units with a laminated inner pane
  • Manufacturer's test evidence supplied with your quote

Fitting in Pwllheli

We arrange surveys and fitting in Pwllheli and across the LL53 postcode district. Tell us your postcode and we will offer dates.

Gwynedd covers slate-built towns such as Bangor, Caernarfon and Porthmadog, Anglesey's Holyhead and Llangefni, and coastal holiday properties exposed to Irish Sea weather.

Typical settings for blast-resistant glazing:

  • Offices in city centres and near potential targets
  • Transport hubs, venues and stadium frontages
  • Government, council and civic buildings
  • Laboratories and industrial sites with process risks

Getting the right glass for your building

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

What the rules say in Wales

Wales

Planning permission

In Wales the local planning authority decides whether a new or altered shopfront needs planning permission. Replacing glass in an existing frame usually does not, because the outside of the building looks much the same. Bollards or barriers on the pavement need consent from the highway authority, normally the council.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 applies in Wales. Windows and transparent surfaces in walls, partitions, doors and gates must be of safety material or protected against breakage where health or safety requires it, and marked so they are apparent. The employer's risk assessment decides where that applies.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Pwllheli address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Pwllheli: questions

Do you cover Caernarfon as well as Pwllheli?

Yes. As well as Pwllheli, we can arrange work in nearby Caernarfon. Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Pwllheli

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Pwllheli

Free survey for new installations in Pwllheli and the LL53 area. Fixed price in writing before anything is ordered.

CallGet a price