Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · NP4 · Gwent

Blast-resistant glazing in Pontypool

Blast-resistant glazing in Pontypool and the NP4 area, measured on site and priced in writing before any glass is ordered.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Pontypool

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of blast-resistant glazing in Pontypool?

Our guide range for blast-resistant glazing in Pontypool is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

  • Blast-resistant net curtains as a fragment-catching layer
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Deep-bite frames and structural silicone or mechanical retention
  • Anti-shatter film with edge-retention systems for existing windows
  • Work planned from the threat assessment and engineer's design
  • Laminated glass with thick or stiff interlayers

Fitting in Pontypool and nearby

Whether you are in central Pontypool or at the edge of the NP4 district, we can arrange a survey. Nearby Cwmbran and Risca are covered too.

Gwent includes Newport's city centre and business parks, the terraced former mining towns of the Ebbw and Afon Lwyd valleys, and Monmouthshire market towns like Abergavenny and Monmouth.

This glazing suits:

  • Government, council and civic buildings
  • Laboratories and industrial sites with process risks
  • Transport hubs, venues and stadium frontages
  • Offices in city centres and near potential targets

Questions we will ask at the survey

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Building regulations and safety in Wales

Wales

Fire-rated glass is different

Glass in fire doors and fire screens must be fire-rated glass tested as part of that door or screen, under Approved Document B for Wales and, in non-domestic premises, the Regulatory Reform (Fire Safety) Order 2005. Security and laminated glass are not fire-rated unless the product is tested for it, so the two cannot simply be swapped.

Planning permission

In Wales the local planning authority decides whether a new or altered shopfront needs planning permission. Replacing glass in an existing frame usually does not, because the outside of the building looks much the same. Bollards or barriers on the pavement need consent from the highway authority, normally the council.

How it works

  1. Postcode and a few photos
  2. On-site survey
  3. Fixed written price and lead time
  4. Fit, check and explain

Blast-resistant glazing in Pontypool: questions

Do you cover Cwmbran as well as Pontypool?

Yes. As well as Pontypool, we can arrange surveys in nearby Cwmbran, Risca and Newport. Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Blast-resistant glazing in nearby towns

Other glazing in Pontypool

Start with a guide price online, then we survey and fix the price in writing.

Get a guide price for Pontypool

Free survey for new installations in Pontypool and the NP4 area. Fixed price in writing before anything is ordered.

CallGet a price