Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · M30 · Greater Manchester

Blast-resistant glazing in Eccles

Blast-resistant glazing for shops and businesses in Eccles, specified after a free survey and fitted by glaziers working under our contract with you.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Eccles

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

How much does blast-resistant glazing cost in Eccles?

Our guide range for blast-resistant glazing in Eccles is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

  • Manufacturer's test evidence supplied with your quote
  • Anti-shatter film with edge-retention systems for existing windows
  • Deep-bite frames and structural silicone or mechanical retention
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Blast-resistant net curtains as a fragment-catching layer
  • Sealed units with a laminated inner pane

Fitting in Eccles and nearby

We can arrange blast-resistant glazing anywhere in Eccles, and in nearby Swinton, Salford and Stretford. Tell us your postcode and we will offer dates.

Greater Manchester mixes city-centre offices and converted mills with Victorian terraces in Salford, Oldham and Bolton, suburban high streets and large out-of-town retail parks.

Typical places for blast-resistant glazing:

  • Embassies, courts and police premises
  • Government, council and civic buildings
  • Transport hubs, venues and stadium frontages
  • Offices in city centres and near potential targets

Things to decide before you order

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Rules that apply in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Guide price online or by phone
  2. Survey in Eccles
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Blast-resistant glazing in Eccles: questions

Which areas near Eccles do you cover?

We can arrange work in Eccles and in nearby Swinton (1 mile), Salford (2 miles) and Stretford (2 miles). Dates depend on installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Blast-resistant glazing in nearby towns

Other glazing in Eccles

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Eccles

Free survey for new installations in Eccles and the M30 area. Fixed price in writing before anything is ordered.

CallGet a price