Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · OL7 · Greater Manchester

Blast-resistant glazing in Ashton-under-Lyne

Start with a guide price for blast-resistant glazing in Ashton-under-Lyne, then book a free survey for a fixed written quote.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Ashton-under-Lyne

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What should blast-resistant glazing cost in Ashton-under-Lyne?

Our guide range for blast-resistant glazing in Ashton-under-Lyne is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Work planned from the threat assessment and engineer's design
  • Laminated glass with thick or stiff interlayers
  • Anti-shatter film with edge-retention systems for existing windows
  • Deep-bite frames and structural silicone or mechanical retention
  • Blast-resistant net curtains as a fragment-catching layer

Fitting in Ashton-under-Lyne and nearby

We can arrange blast-resistant glazing anywhere in Ashton-under-Lyne, and in nearby Dukinfield, Stalybridge and Droylsden. Tell us your postcode and we will offer dates.

Greater Manchester mixes city-centre offices and converted mills with Victorian terraces in Salford, Oldham and Bolton, suburban high streets and large out-of-town retail parks.

Good candidates for blast-resistant glazing:

  • Offices in city centres and near potential targets
  • Embassies, courts and police premises
  • Laboratories and industrial sites with process risks
  • Government, council and civic buildings

Before the glass is ordered

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Glazing rules in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Guide price online or by phone
  2. Survey in Ashton-under-Lyne
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Blast-resistant glazing in Ashton-under-Lyne: questions

Which areas near Ashton-under-Lyne do you cover?

We can arrange work in Ashton-under-Lyne and in nearby Dukinfield (1 mile), Stalybridge (2 miles) and Droylsden (2 miles). Dates depend on installer availability.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Blast-resistant glazing in nearby towns

Other glazing in Ashton-under-Lyne

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Ashton-under-Lyne

Free survey for new installations in Ashton-under-Lyne and the OL7 area. Fixed price in writing before anything is ordered.

CallGet a price