Blast-resistant glazing in Harwich

What is the price of blast-resistant glazing in Harwich?

Typical prices for blast-resistant glazing in Harwich are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

Sealed units with a laminated inner pane
Work planned from the threat assessment and engineer's design
Deep-bite frames and structural silicone or mechanical retention
Laminated glass with thick or stiff interlayers
Manufacturer's test evidence supplied with your quote
Blast-resistant net curtains as a fragment-catching layer

Fitting in Harwich and nearby

We can arrange blast-resistant glazing anywhere in Harwich, and in nearby Felixstowe, Ipswich and Clacton-on-Sea. Tell us your postcode and we will offer dates.

Essex runs from Chelmsford and Colchester's town-centre retail and Georgian streets to Southend's seafront and large post-war and new-build estates in Basildon and Harlow.

This glazing suits:

Government, council and civic buildings
Transport hubs, venues and stadium frontages
Offices in city centres and near potential targets
Laboratories and industrial sites with process risks

Questions we will ask at the survey

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Send sizes or use the quote tool
Free survey at your Harwich address
Fixed price in writing
Glass made, then fitted

Blast-resistant glazing in Harwich: questions

Which areas near Harwich do you cover?

We can arrange work in Harwich and in nearby Felixstowe (3 miles), Ipswich (10 miles) and Clacton-on-Sea (12 miles). Dates depend on installer availability.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Blast-resistant glazing in nearby towns

Other glazing in Harwich

Ready for a price? Use the form or call 0800 088 6248.

Free quote in Harwich