Blast-resistant glazing in Billericay

How much does blast-resistant glazing cost in Billericay?

Guide prices for blast-resistant glazing in Billericay are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
Deep-bite frames and structural silicone or mechanical retention
Laminated glass with thick or stiff interlayers
Sealed units with a laminated inner pane
Manufacturer's test evidence supplied with your quote
Anti-shatter film with edge-retention systems for existing windows

Fitting in Billericay and nearby

Whether you are in central Billericay or at the edge of the CM11 district, we can arrange a survey. Nearby Basildon and Wickford are covered too.

Essex runs from Chelmsford and Colchester's town-centre retail and Georgian streets to Southend's seafront and large post-war and new-build estates in Basildon and Harlow.

Typical places for blast-resistant glazing:

Offices in city centres and near potential targets
Embassies, courts and police premises
Laboratories and industrial sites with process risks
Transport hubs, venues and stadium frontages

Things to decide before you order

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Rules that apply in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Blast-resistant glazing in Billericay: questions

Do you cover Basildon as well as Billericay?

Yes. As well as Billericay, we can arrange surveys in nearby Basildon, Wickford and Brentwood. Dates depend on installer availability.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Blast-resistant glazing in nearby towns

Other glazing in Billericay

Get a guide price now and book your free survey in Billericay.