Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · SR7 · Durham

Blast-resistant glazing in Seaham

Blast-resistant glazing for shops and businesses in Seaham, specified after a free survey and fitted by glaziers working under our contract with you.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Seaham

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

How much does blast-resistant glazing cost in Seaham?

Guide prices for blast-resistant glazing in Seaham are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What you can specify

  • Work planned from the threat assessment and engineer's design
  • Deep-bite frames and structural silicone or mechanical retention
  • Laminated glass with thick or stiff interlayers
  • Manufacturer's test evidence supplied with your quote
  • Anti-shatter film with edge-retention systems for existing windows
  • Blast-resistant net curtains as a fragment-catching layer

Fitting in Seaham and nearby

We arrange surveys and fitting in Seaham and across the SR7 postcode district, as well as in nearby Houghton-le-Spring (5 miles) and Sunderland (5 miles). Dates depend on installer availability.

County Durham runs from Durham City's listed streets around the cathedral to former colliery-village terraces, Darlington's Victorian centre and newer estates along the A1(M).

Typical places for blast-resistant glazing:

  • Transport hubs, venues and stadium frontages
  • Government, council and civic buildings
  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets

Things to decide before you order

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Rules that apply in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Seaham address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Seaham: questions

Do you cover Houghton-le-Spring as well as Seaham?

Yes. As well as Seaham, we can arrange surveys in nearby Houghton-le-Spring, Sunderland and Peterlee. Dates depend on installer availability.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Seaham

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Seaham

Free survey for new installations in Seaham and the SR7 area. Fixed price in writing before anything is ordered.

CallGet a price