Blast-resistant glazing in Montrose

What should blast-resistant glazing cost in Montrose?

Budget £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Montrose, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What you can specify

Manufacturer's test evidence supplied with your quote
Anti-shatter film with edge-retention systems for existing windows
Work planned from the threat assessment and engineer's design
Laminated glass with thick or stiff interlayers
Sealed units with a laminated inner pane
Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934

Fitting in Montrose and nearby

We arrange surveys and fitting in Montrose and across the DD10 postcode district, as well as in nearby Arbroath (11 miles) and Forfar (17 miles). Dates depend on installer availability.

Dundee's waterfront offices and city-centre shops sit among sandstone tenements, while Angus has the market town of Forfar and coastal Arbroath, Carnoustie and Montrose.

Good candidates for blast-resistant glazing:

Government, council and civic buildings
Transport hubs, venues and stadium frontages
Offices in city centres and near potential targets
Laboratories and industrial sites with process risks

Before the glass is ordered

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Glazing rules in Scotland

Scotland

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 applies in Scotland. Windows and transparent surfaces in walls, partitions, doors and gates must be of safety material or protected against breakage where health or safety requires it, and marked so people see them. The duty holder's risk assessment decides where.

Planning permission

Under the Scottish planning system the council decides whether a new or altered shopfront needs planning permission; changing the glass in an existing frame usually does not. Bollards or barriers in a road or footway need consent from the roads authority, which is normally the council.

How it works

Send sizes or use the quote tool
Free survey at your Montrose address
Fixed price in writing
Glass made, then fitted

Blast-resistant glazing in Montrose: questions

Do you cover Arbroath as well as Montrose?

Yes. As well as Montrose, we can arrange surveys in nearby Arbroath, Forfar and Stonehaven. Dates depend on installer availability.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Blast-resistant glazing in nearby towns

Other glazing in Montrose

Ready for a price? Use the form or call 0800 088 6248.