Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · TQ1 · Devon

Blast-resistant glazing in Torquay

Blast-resistant glazing in Torquay (TQ1), with a free survey for new installations and a written quote that names the glass being supplied.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Torquay

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What should blast-resistant glazing cost in Torquay?

Our guide range for blast-resistant glazing in Torquay is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Options for blast-resistant glazing in Torquay

  • Sealed units with a laminated inner pane
  • Blast-resistant net curtains as a fragment-catching layer
  • Manufacturer's test evidence supplied with your quote
  • Work planned from the threat assessment and engineer's design
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Laminated glass with thick or stiff interlayers

Fitting in Torquay and nearby

Torquay is about 28 miles from Plymouth, the main centre for Devon. We can survey and fit across the TQ1 district and in nearby places such as Paignton and Newton Abbot.

Devon spans Exeter's Georgian and post-war centre, Plymouth's rebuilt 1950s shopping streets and waterfront offices, and seaside towns where sea air is hard on window frames and seals.

Good candidates for blast-resistant glazing:

  • Transport hubs, venues and stadium frontages
  • Embassies, courts and police premises
  • Offices in city centres and near potential targets
  • Government, council and civic buildings

Before the glass is ordered

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Glazing rules in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Postcode and a few photos
  2. On-site survey
  3. Fixed written price and lead time
  4. Fit, check and explain

Blast-resistant glazing in Torquay: questions

Which areas near Torquay do you cover?

We can arrange work in Torquay and in nearby Paignton (3 miles), Newton Abbot (6 miles) and Exmouth (12 miles). Dates depend on installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Blast-resistant glazing in nearby towns

Other glazing in Torquay

Start with a guide price online, then we survey and fix the price in writing.

Get a guide price for Torquay

Free survey for new installations in Torquay and the TQ1 area. Fixed price in writing before anything is ordered.

CallGet a price