Blast-resistant glazing in Bedford

How much does blast-resistant glazing cost in Bedford?

Typical prices for blast-resistant glazing in Bedford are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

Work planned from the threat assessment and engineer's design
Sealed units with a laminated inner pane
Manufacturer's test evidence supplied with your quote
Anti-shatter film with edge-retention systems for existing windows
Blast-resistant net curtains as a fragment-catching layer
Laminated glass with thick or stiff interlayers

Fitting in Bedford and nearby

Surveys in Bedford (MK40) are booked around installer availability. We also cover nearby Ampthill (8 miles), St Neots (10 miles) and Rushden (12 miles).

Bedford's Victorian terraces and Luton's long shopping streets sit alongside 1960s to 1990s estates and newer uPVC-glazed developments around Leighton Buzzard and the M1 corridor.

Typical places for blast-resistant glazing:

Transport hubs, venues and stadium frontages
Laboratories and industrial sites with process risks
Government, council and civic buildings
Embassies, courts and police premises

Things to decide before you order

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Rules that apply in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Send sizes or use the quote tool
Free survey at your Bedford address
Fixed price in writing
Glass made, then fitted

Blast-resistant glazing in Bedford: questions

Can you survey in Bedford and nearby towns?

Yes. Surveys in Bedford, Ampthill and St Neots are booked around installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Blast-resistant glazing in nearby towns

Other glazing in Bedford

Ready for a price? Use the form or call 0800 088 6248.

Free quote in Bedford