Anti-bandit glass in Felling

What is the price of anti-bandit glass in Felling?

Typical prices for anti-bandit glass in Felling are £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

Specification at a glance

Internal beads and anti-tamper fixings
Low-iron glass to keep thick panes clear
Framing upgrades where existing frames are too light
Single panes for shopfronts, screens and doors
BS EN 356 classes P6B, P7B and P8B
Can be built into a sealed unit for thermal performance

Fitting in Felling and nearby

Whether you are in central Felling or at the edge of the NE10 district, we can arrange a survey. Nearby Gateshead and Newcastle upon Tyne are covered too.

Tyne and Wear covers Newcastle's Grainger Town stone streets and quayside offices, the town centres of Sunderland and Gateshead, and large inter-war and post-war housing estates.

This glazing suits:

Reception screens in higher-risk premises
Phone, electronics and designer retailers
Pharmacies with controlled drug storage
Jewellers, watch dealers and pawnbrokers

Questions we will ask at the survey

P6B, P7B or P8B

P6B is the usual step up for high-value retail. P7B and P8B are chosen where a risk assessment or insurer points to a sustained, equipped attack.

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

Building regulations and safety in England

England

Insurer requirements

Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Anti-bandit glass in Felling: questions

Do you cover Gateshead as well as Felling?

Yes. As well as Felling, we can arrange surveys in nearby Gateshead, Newcastle upon Tyne and Hebburn. Dates depend on installer availability.

Can anti-bandit glass go into my existing shopfront?

Sometimes. Many older shopfront frames are too shallow or too light for thick glass. We check the rebate depth, bead strength and fixings, and price new framing if the existing frame would be the weak point.

What is the difference between anti-bandit and laminated glass?

All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.

How thick is anti-bandit glass?

It depends on the manufacturer's makeup for each class. P6B is often around 11.5 mm and P8B commonly 20 mm or more. We quote the tested makeup for the class you need.

Anti-bandit glass in nearby towns

Other glazing in Felling

Get a guide price now and book your free survey in Felling.

Free quote in Felling