Anti-bandit glass in Staffordshire

What should anti-bandit glass cost in Staffordshire?

Budget £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane for anti-bandit glass in Staffordshire, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

What you can specify

Multi-ply makeups with several thick interlayers
Internal beads and anti-tamper fixings
BS EN 356 classes P6B, P7B and P8B
Low-iron glass to keep thick panes clear
Manufacturer's test evidence supplied with your quote
Single panes for shopfronts, screens and doors

Covering Staffordshire

We can arrange surveys and fitting anywhere in Staffordshire, including Stoke-on-Trent and Newcastle-under-Lyme. Dates depend on installer availability. Choose your town below for local details.

Staffordshire mixes Stoke-on-Trent's Victorian pottery-town terraces with Lichfield's cathedral quarter, Burton's brewery streets and newer estates around Tamworth and Cannock.

Good candidates for anti-bandit glass:

Reception screens in higher-risk premises
Pharmacies with controlled drug storage
Cash offices and counting rooms
Phone, electronics and designer retailers

Towns in Staffordshire

Before the glass is ordered

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

Weight and handling

Large anti-bandit panes can weigh several hundred kilograms. Fitting may need lifting equipment, extra installers and a planned slot outside trading hours.

Glazing rules in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Send sizes or use the quote tool
Free survey at your Staffordshire address
Fixed price in writing
Glass made, then fitted

Anti-bandit glass in Staffordshire: questions

Which towns in Staffordshire do you cover?

We can arrange work anywhere in Staffordshire, including Stoke-on-Trent, Newcastle-under-Lyme, Burton upon Trent, Cannock and Tamworth, and in other towns across the area.

What is the difference between anti-bandit and laminated glass?

All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.

How thick is anti-bandit glass?

It depends on the manufacturer's makeup for each class. P6B is often around 11.5 mm and P8B commonly 20 mm or more. We quote the tested makeup for the class you need.

Is anti-bandit glass the same as bullet-resistant glass?

No. Anti-bandit glass is tested against manual attack under BS EN 356. Bullet-resistant glass is tested against firearms under BS EN 1063, and is thicker and heavier again.

Other glazing in Staffordshire

Ready for a price? Use the form or call 0800 088 6248.

Free quote in Staffordshire