Anti-bandit glass in South Yorkshire

What is the price of anti-bandit glass in South Yorkshire?

Our guide range for anti-bandit glass in South Yorkshire is £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

Specification at a glance

Internal beads and anti-tamper fixings
Low-iron glass to keep thick panes clear
BS EN 356 classes P6B, P7B and P8B
Multi-ply makeups with several thick interlayers
Can be built into a sealed unit for thermal performance
Single panes for shopfronts, screens and doors

Covering South Yorkshire

We can arrange surveys and fitting anywhere in South Yorkshire, including Sheffield and Rotherham. Dates depend on installer availability. Choose your town below for local details.

South Yorkshire includes Sheffield's city-centre offices and shops, Victorian terraces along its valleys, and town centres in Doncaster, Rotherham and Barnsley ringed by retail parks.

This glazing suits:

Cash offices and counting rooms
Phone, electronics and designer retailers
Reception screens in higher-risk premises
Jewellers, watch dealers and pawnbrokers

Towns in South Yorkshire

Questions we will ask at the survey

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

Weight and handling

Large anti-bandit panes can weigh several hundred kilograms. Fitting may need lifting equipment, extra installers and a planned slot outside trading hours.

Building regulations and safety in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Insurer requirements

Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Anti-bandit glass in South Yorkshire: questions

Which towns in South Yorkshire do you cover?

We can arrange work anywhere in South Yorkshire, including Sheffield, Rotherham, Doncaster and Barnsley.

Is anti-bandit glass the same as bullet-resistant glass?

No. Anti-bandit glass is tested against manual attack under BS EN 356. Bullet-resistant glass is tested against firearms under BS EN 1063, and is thicker and heavier again.

Can anti-bandit glass go into my existing shopfront?

Sometimes. Many older shopfront frames are too shallow or too light for thick glass. We check the rebate depth, bead strength and fixings, and price new framing if the existing frame would be the weak point.

What is the difference between anti-bandit and laminated glass?

All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.

Other glazing in South Yorkshire

Start with a guide price online, then we survey and fix the price in writing.

Free quote in South Yorkshire