Anti-bandit glass in Tunbridge Wells

Anti-bandit glass in Tunbridge Wells: what will it cost?

Expect £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane for anti-bandit glass in Tunbridge Wells. The written quote names the glass makeup, the price and the lead time before you commit.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

What goes into anti-bandit glass

Manufacturer's test evidence supplied with your quote
Single panes for shopfronts, screens and doors
Framing upgrades where existing frames are too light
Multi-ply makeups with several thick interlayers
Can be built into a sealed unit for thermal performance
Internal beads and anti-tamper fixings

Fitting in Tunbridge Wells and nearby

Surveys in Tunbridge Wells (TN1) are booked around installer availability. We also cover nearby Tonbridge (4 miles), Crowborough (7 miles) and Sevenoaks (10 miles).

Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.

Typical settings for anti-bandit glass:

Phone, electronics and designer retailers
Pharmacies with controlled drug storage
Cash offices and counting rooms
Reception screens in higher-risk premises

Getting the right glass for your building

Weight and handling

Large anti-bandit panes can weigh several hundred kilograms. Fitting may need lifting equipment, extra installers and a planned slot outside trading hours.

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

What the rules say in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Send sizes or use the quote tool
Free survey at your Tunbridge Wells address
Fixed price in writing
Glass made, then fitted

Anti-bandit glass in Tunbridge Wells: questions

Can you survey in Tunbridge Wells and nearby towns?

Yes. Surveys in Tunbridge Wells, Tonbridge and Crowborough are booked around installer availability.

How thick is anti-bandit glass?

It depends on the manufacturer's makeup for each class. P6B is often around 11.5 mm and P8B commonly 20 mm or more. We quote the tested makeup for the class you need.

Can anti-bandit glass go into my existing shopfront?

Sometimes. Many older shopfront frames are too shallow or too light for thick glass. We check the rebate depth, bead strength and fixings, and price new framing if the existing frame would be the weak point.

Is anti-bandit glass the same as bullet-resistant glass?

No. Anti-bandit glass is tested against manual attack under BS EN 356. Bullet-resistant glass is tested against firearms under BS EN 1063, and is thicker and heavier again.

Anti-bandit glass in nearby towns

Other glazing in Tunbridge Wells

Ready for a price? Use the form or call 0800 088 6248.