Anti-bandit glass in Herne Bay

What should anti-bandit glass cost in Herne Bay?

Typical prices for anti-bandit glass in Herne Bay are £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

Glass and fitting options

Internal beads and anti-tamper fixings
BS EN 356 classes P6B, P7B and P8B
Single panes for shopfronts, screens and doors
Low-iron glass to keep thick panes clear
Framing upgrades where existing frames are too light
Can be built into a sealed unit for thermal performance

Fitting in Herne Bay and nearby

From the CT6 district we also cover Whitstable (5 miles) and Canterbury (7 miles). Survey dates depend on installer availability.

Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.

Good candidates for anti-bandit glass:

Cash offices and counting rooms
Pharmacies with controlled drug storage
Jewellers, watch dealers and pawnbrokers
Reception screens in higher-risk premises

Before the glass is ordered

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

P6B, P7B or P8B

P6B is the usual step up for high-value retail. P7B and P8B are chosen where a risk assessment or insurer points to a sustained, equipped attack.

Glazing rules in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Anti-bandit glass in Herne Bay: questions

Can you survey in Herne Bay and nearby towns?

Yes. Surveys in Herne Bay, Whitstable and Canterbury are booked around installer availability.

How thick is anti-bandit glass?

It depends on the manufacturer's makeup for each class. P6B is often around 11.5 mm and P8B commonly 20 mm or more. We quote the tested makeup for the class you need.

What is the difference between anti-bandit and laminated glass?

All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.

Can anti-bandit glass go into my existing shopfront?

Sometimes. Many older shopfront frames are too shallow or too light for thick glass. We check the rebate depth, bead strength and fixings, and price new framing if the existing frame would be the weak point.

Anti-bandit glass in nearby towns

Other glazing in Herne Bay

Start with a guide price online, then we survey and fix the price in writing.