Anti-bandit glass in Atherton

How much should I budget for anti-bandit glass in Atherton?

As a guide, allow £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane for anti-bandit glass in Atherton, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

What goes into anti-bandit glass

BS EN 356 classes P6B, P7B and P8B
Single panes for shopfronts, screens and doors
Framing upgrades where existing frames are too light
Manufacturer's test evidence supplied with your quote
Internal beads and anti-tamper fixings
Can be built into a sealed unit for thermal performance

Fitting in Atherton and nearby

Surveys in Atherton (M46) are booked around installer availability. We also cover nearby Tyldesley (1 mile), Westhoughton (2 miles) and Leigh (2 miles).

Greater Manchester mixes city-centre offices and converted mills with Victorian terraces in Salford, Oldham and Bolton, suburban high streets and large out-of-town retail parks.

Common uses:

Reception screens in higher-risk premises
Cash offices and counting rooms
Jewellers, watch dealers and pawnbrokers
Pharmacies with controlled drug storage

What to think about first

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

P6B, P7B or P8B

P6B is the usual step up for high-value retail. P7B and P8B are chosen where a risk assessment or insurer points to a sustained, equipped attack.

Consents and safety: England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Send sizes or use the quote tool
Free survey at your Atherton address
Fixed price in writing
Glass made, then fitted

Anti-bandit glass in Atherton: questions

Can you survey in Atherton and nearby towns?

Yes. Surveys in Atherton, Tyldesley and Westhoughton are booked around installer availability.

Can anti-bandit glass go into my existing shopfront?

Sometimes. Many older shopfront frames are too shallow or too light for thick glass. We check the rebate depth, bead strength and fixings, and price new framing if the existing frame would be the weak point.

Is anti-bandit glass the same as bullet-resistant glass?

No. Anti-bandit glass is tested against manual attack under BS EN 356. Bullet-resistant glass is tested against firearms under BS EN 1063, and is thicker and heavier again.

Does my insurer require anti-bandit glass?

Some insurers name a glass class for certain stock or cash limits. Send us the policy wording and we will quote to it. The insurer decides whether a product meets their conditions.

Anti-bandit glass in nearby towns

Other glazing in Atherton

Ready for a price? Use the form or call 0800 088 6248.