Anti-bandit glass in Barnes

How much does anti-bandit glass cost in Barnes?

Budget £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane for anti-bandit glass in Barnes, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

Specification at a glance

Single panes for shopfronts, screens and doors
BS EN 356 classes P6B, P7B and P8B
Multi-ply makeups with several thick interlayers
Framing upgrades where existing frames are too light
Low-iron glass to keep thick panes clear
Can be built into a sealed unit for thermal performance

Fitting in Barnes and nearby

Whether you are in central Barnes or at the edge of the SW13 district, we can arrange a survey. Nearby Chiswick and Putney are covered too.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Typical places for anti-bandit glass:

Cash offices and counting rooms
Pharmacies with controlled drug storage
Phone, electronics and designer retailers
Jewellers, watch dealers and pawnbrokers

Things to decide before you order

Weight and handling

Large anti-bandit panes can weigh several hundred kilograms. Fitting may need lifting equipment, extra installers and a planned slot outside trading hours.

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

Rules that apply in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Anti-bandit glass in Barnes: questions

Do you cover Chiswick as well as Barnes?

Yes. As well as Barnes, we can arrange surveys in nearby Chiswick, Putney and Fulham. Dates depend on installer availability.

What is the difference between anti-bandit and laminated glass?

All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.

How thick is anti-bandit glass?

It depends on the manufacturer's makeup for each class. P6B is often around 11.5 mm and P8B commonly 20 mm or more. We quote the tested makeup for the class you need.

Can anti-bandit glass go into my existing shopfront?

Sometimes. Many older shopfront frames are too shallow or too light for thick glass. We check the rebate depth, bead strength and fixings, and price new framing if the existing frame would be the weak point.

Anti-bandit glass in nearby towns

Other glazing in Barnes

Start with a guide price online, then we survey and fix the price in writing.

Free quote in Barnes