Anti-bandit glass in Stockton-on-Tees

What should anti-bandit glass cost in Stockton-on-Tees?

Our guide range for anti-bandit glass in Stockton-on-Tees is £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

Specification at a glance

Framing upgrades where existing frames are too light
Can be built into a sealed unit for thermal performance
Multi-ply makeups with several thick interlayers
Internal beads and anti-tamper fixings
BS EN 356 classes P6B, P7B and P8B
Single panes for shopfronts, screens and doors

Fitting in Stockton-on-Tees and nearby

Whether you are in central Stockton-on-Tees or at the edge of the TS19 district, we can arrange a survey. Nearby Billingham and Thornaby-on-Tees are covered too.

County Durham runs from Durham City's listed streets around the cathedral to former colliery-village terraces, Darlington's Victorian centre and newer estates along the A1(M).

Good candidates for anti-bandit glass:

Cash offices and counting rooms
Pharmacies with controlled drug storage
Jewellers, watch dealers and pawnbrokers
Phone, electronics and designer retailers

Before the glass is ordered

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

Weight and handling

Large anti-bandit panes can weigh several hundred kilograms. Fitting may need lifting equipment, extra installers and a planned slot outside trading hours.

Glazing rules in England

England

Insurer requirements

Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Anti-bandit glass in Stockton-on-Tees: questions

Do you cover Billingham as well as Stockton-on-Tees?

Yes. As well as Stockton-on-Tees, we can arrange surveys in nearby Billingham, Thornaby-on-Tees and Middlesbrough. Dates depend on installer availability.

How thick is anti-bandit glass?

It depends on the manufacturer's makeup for each class. P6B is often around 11.5 mm and P8B commonly 20 mm or more. We quote the tested makeup for the class you need.

Does my insurer require anti-bandit glass?

Some insurers name a glass class for certain stock or cash limits. Send us the policy wording and we will quote to it. The insurer decides whether a product meets their conditions.

What is the difference between anti-bandit and laminated glass?

All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.

Anti-bandit glass in nearby towns

Other glazing in Stockton-on-Tees

Start with a guide price online, then we survey and fix the price in writing.