How much should I budget for anti-bandit glass in Ayrshire?
Budget £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane for anti-bandit glass in Ayrshire, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.
Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.
What goes into anti-bandit glass
- Can be built into a sealed unit for thermal performance
- Single panes for shopfronts, screens and doors
- Manufacturer's test evidence supplied with your quote
- BS EN 356 classes P6B, P7B and P8B
- Internal beads and anti-tamper fixings
- Framing upgrades where existing frames are too light
Covering Ayrshire
We can arrange surveys and fitting anywhere in Ayrshire, including Kilmarnock and Ayr. Dates depend on installer availability. Choose your town below for local details.
Ayrshire mixes the shopping streets of Ayr and Kilmarnock with coastal towns such as Largs, Troon and Irvine that take Firth of Clyde weather, and rural villages inland.
Common uses:
- Jewellers, watch dealers and pawnbrokers
- Pharmacies with controlled drug storage
- Phone, electronics and designer retailers
- Cash offices and counting rooms
Towns in Ayrshire
What to think about first
P6B, P7B or P8B
P6B is the usual step up for high-value retail. P7B and P8B are chosen where a risk assessment or insurer points to a sustained, equipped attack.
Glass alone or glass and frame
The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.
Consents and safety: Scotland
Planning permission
Under the Scottish planning system the council decides whether a new or altered shopfront needs planning permission; changing the glass in an existing frame usually does not. Bollards or barriers in a road or footway need consent from the roads authority, which is normally the council.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 applies in Scotland. Windows and transparent surfaces in walls, partitions, doors and gates must be of safety material or protected against breakage where health or safety requires it, and marked so people see them. The duty holder's risk assessment decides where.
How it works
- Send sizes or use the quote tool
- Free survey at your Ayrshire address
- Fixed price in writing
- Glass made, then fitted
Anti-bandit glass in Ayrshire: questions
Which towns in Ayrshire do you cover?
We can arrange work anywhere in Ayrshire, including Kilmarnock, Ayr, Irvine, Largs and Saltcoats, and in other towns across the area.
What is the difference between anti-bandit and laminated glass?
All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.
Can anti-bandit glass go into my existing shopfront?
Sometimes. Many older shopfront frames are too shallow or too light for thick glass. We check the rebate depth, bead strength and fixings, and price new framing if the existing frame would be the weak point.
Is anti-bandit glass the same as bullet-resistant glass?
No. Anti-bandit glass is tested against manual attack under BS EN 356. Bullet-resistant glass is tested against firearms under BS EN 1063, and is thicker and heavier again.
Other glazing in Ayrshire
- Patio and bifold door security glass
- Security glass for home windows
- Counter and reception security screens
- Laminated roof and conservatory glass
- Anti-ram-raid glazing
- Shopfront security glass
Ready for a price? Use the form or call 0800 088 6248.